We have the facilities to design and manufacture a wide range of customized LCDs.
When ordering customized LCDs, please check the following points:
User Application
1. Panel dimensions
A. Glass length F. Width of pin area*
 K. Panel thickness
B. Front glass
 G. Width of seal (2.0mm typ.)
 L. Pattem height
C. Back glass
 H. Width of seal (2.0mm typ.)
 M. Sealing position Left/ right
D. Viewing area I. Pin Pitch
 N. Viewing angle
E. Viewing area J. Glass thickness
 O.
* Regarding the width of each pin. 2.5-mm is required for pin types. And 3.0 mm or greater for heat seal, FPC types.
For shapes other than those given above, please provide separate instructions. (Outline drawing)
   
2. Display mode: Positive Negative
3. Polarizing plate: (F) color
(B)
4. Printing: Yes on (color: ) Spec
5. Backlight: Yes on Backlight device
6. Drive method: Drive LSI Drive voltage
v Static/dynamic Duty Bias
7. Connection method:
Rubber connector heat seal pin connector
    (Number of pins: )
    (Pin pitch : )
    (Pin Length : F.Y mm)
8. Temperature conditions: Storage temperature ( ¢X C to ¢X C)
Operating temperature ( ¢X C to ¢X C)
9. Schedule:
(Example Schedule)
(Desired Schedule)
Approval drawings: After determination of final specifications 14 days
 Specufication received: month ,day
Engineering samples: After approval of drawings 35 days
 Engineering samples: month ,day ,pcs.
Mass production: After approval of engineering sample 60 days Mass production trial: month , day , pcs.
  Mass production: month , day , pcs.
10. Planned quantity: /Lot. /month
Startup of mass production: month
   
 

Note: Since the lead time for development and production varies according to the development capacity and production capacity, please specify the details as soon as possible.